Menu

Benefits of Having a Company Who Handles Heater Repair in Wichita, Kansas Service a Heating System Prior to Winter

Every year before winter begins it is important for a homeowner to make sure their heating system is in good working order. By doing this ahead of time, very often they can avoid having the unit break down when it is needed most. This can be beneficial in helping to keep the home warm and it is a good idea since having a heater repaired during winter can often be more costly than a Heater Repair in Wichita, Kansas might be in the off season.

One of the best ways to make sure a heating system will work through the winter months is by having a repair person come out and spend some time inspecting and cleaning the unit. Most repair companies have technicians who are trained to handle this type of preventative maintenance for their customers.
A technician from a company who handles Heater Repair in Wichita, Kansas will generally spend time cleaning the blower unit on the system. This system is generally used by the air cooling system as well. Because of this, it is most likely dirty from being used throughout the summer and the technician will need to vacuum it well. The air filter will also be examined and replaced if it is dirty.

4531535_m

 

The motor on the blower will be inspected to ensure there are no signs indicating any problems in its operation. The technician from a company, like Kelley and Dawson Service, will be looking for signs of scorching or damaged wires. These can be signs of issues with the motor, which may be dangerous and will need to be addressed promptly. If the motor has oil ports, oil will be added to prevent the bearings inside the motor from locking up.

The fan and fan belt will also need to be inspected. If either of these components shows any signs of damage, they will need to be replaced. The fan belt will also be checked to ensure it has the proper tension. If it is too loose or too tight, it will need to be adjusted accordingly.

The burner will need to be inspected. The technician can generally determine the condition of the burner by turning the heat on. The flames on the burner should be blue and burning steady. If not, the burner is most likely dirty. The repair person will need to disassemble the burner and clean it before the unit is put in use.

Be the first to like.