When a home’s water heater is not working properly, most homeowners will want to contact a company that handles plumbing in Fargo ND as quickly as possible. Without a good supply of heated water, many of the daily tasks that need to be done by the members of the home will be more difficult to accomplish and often they will not be as effective as well. This is because hot water is needed to cut through grease and other types of oils on many of the things that will need to be cleaned. In addition, hot water is also beneficial in killing bacteria and other types of germs, which can help in maintaining a healthy home.
Generally, when a water heater has stopped producing hot water, one of the first things a repair person will want to inspect is the elements that are used in heating the water. On a gas unit the pilot, control valve, thermocouples and the burner will need to be inspected to ensure that these elements are working properly and do not need to be replaced. An electrical unit relies on heating elements that should be checked to make sure they are in good working order.
Many times a technician that handles plumbing in Fargo ND will next want to inspect the condition of the water as it drains from the unit through the drain valve at the bottom of the unit. Often sediment will back up inside a water heater tank and cause the heat transfer from the unit to the water to be hindered. This can be determined by checking for sediment as the water that drains from the unit. If sediment is present, the technician will need to flush the unit to remove the buildup so that the unit transfer of heat can return to normal.
Flushing a unit is generally done by first drain all the water from the unit. Next, the technician will begin pushing water though the unit by turning the water on and leaving the drain valve open. Water will continue to be sent through the unit until the water that exits from the unit is clear.
If the unit will still not produce heated water, the plumber may need to replace the unit with a new one.