Perhaps you have a stump or two in your yard that you want to remove. It’s not an easy task. To do it properly, you need to rent a stump grinder. You can rent one from a Tree removal service McLean, but make sure to follow all the rules. The machine is dangerous, but it gets the job done quick and easy.
Wear Protective Gear
Always wear protective gear when working a stump grinder. Wear gloves on your hands and protect your face from flying wood chips with glasses and face mask. It is also a good idea to wear protective chaps on your legs, just in case you get a little too close to the blade of the grinder.
Start On One Side of the Stump
Never grind the middle of a stump. Always start on one end of the stump and work your way across to the other side. Place the grinder so the blade sits on the left side of the stump and right on the edge. Start the blade, and let it grind about three inches down the stump. This happens within seconds. Move the blade to the right, grinding three inches at a time, until you reach the right side. Go back to the left, grinding as you go. Continue to work back and forth across the front of the stump until it is completely removed before moving the blade forward.
Grind Deep into the Ground
To fully remove the stump, you need to grind into the ground at least four inches. visit www.usgreentree.com to keep working back and forth a few inches at a time. When you hit ground, just keep going. You are going to create a hole, but it’s going to be a much smaller hole than if you dug out the stump with an ax and shovel.
Clean up the Mess
Shovel and rake up all the wood chips left by the machine. Don’t leave it on the ground to rot. You can use it in other gardening projects or donate it to a local business that uses wood chips. Fill in the hole with fresh topsoil. You can plant grass seed in the topsoil to hide the area and to ensure it matches the rest of your lawn.
If you are ever unsure of a DIY project, talk with or hire a professional a Tree removal service, such as Greentree McLean.